Angular Contact Bearing-The QWE Company

Angular contact ball bearings mainly bear large unidirectional axial loads, and the greater the contact angle, the greater the load capacity. The cage material is steel, brass or engineering plastic, and the molding method is stamping or turning, which is··

Part Number	d - Bore	D - Outer Diameter	B - Width	Cr - Dynamic Radial Rating	Cor - Static Radial Rating	Reference speed	Limiting speed
3205A	25 mm	52 mm	20.6 mm	21.6 N	14.3 N	14000 rpm	12000 rpm
3305A	25 mm	62 mm	25.4 mm	32 N	20.4 N	12000 rpm	11000 rpm
3206A	30 mm	62 mm	23.8 mm	30 N	20.4 N	11000 rpm	10000 rpm
3306A	30 mm	72 mm	30.2 mm	42.5 N	30 N	10000 rpm	9000 rpm
3207A	35 mm	72 mm	27 mm	40 N	28 N	10000 rpm	9000 rpm
3307A	35 mm	80 mm	34.9 mm	52 N	35.5 N	9500 rpm	8500 rpm
3307DJ1	35 mm	80 mm	34.9 mm	52.7 N	41.5 N	9000 rpm	8000 rpm
3208A	40 mm	80 mm	30.2 mm	48 N	36.5 N	9000 rpm	8000 rpm
3308DNRCBM	40 mm	90 mm	36.5 mm	49.4 N	41.5 N	8000 rpm	7000 rpm
3308A	40 mm	90 mm	36.5 mm	64 N	44 N	8000 rpm	7500 rpm
3308DMA	40 mm	90 mm	36.5 mm	68.9 N	57 N	8000 rpm	7000 rpm
3308DTN9	40 mm	90 mm	36.5 mm	68.9 N	57 N	8000 rpm	7000 rpm
3209A	45 mm	85 mm	30.2 mm	51 N	39 N	8500 rpm	7500 rpm
3309DNRCBM	45 mm	100 mm	39.7 mm	61.8 N	52 N	7500 rpm	6300 rpm
3309A	45 mm	100 mm	39.7 mm	75 N	53 N	7500 rpm	6700 rpm
3309DMA	45 mm	100 mm	39.7 mm	79.3 N	69.5 N	7500 rpm	6300 rpm
3210A	50 mm	90 mm	30.2 mm	51 N	42.5 N	8000 rpm	7000 rpm
3310DNRCBM	50 mm	110 mm	44.4 mm	81.9 N	69.5 N	6700 rpm	5600 rpm
3310A	50 mm	110 mm	44.4 mm	90 N	64 N	6700 rpm	6000 rpm
3310DMA	50 mm	110 mm	44.4 mm	93.6 N	85 N	6700 rpm	5600 rpm

Follow us: