Service Hotline
+49 201 844 536464
Angular contact ball bearings mainly bear large unidirectional axial loads, and the greater the contact angle, the greater the load capacity. The cage material is steel, brass or engineering plastic, and the molding method is stamping or turning, which is··
Part Number |
d - Bore |
D - Outer Diameter |
B - Width |
Cr - Dynamic Radial Rating |
Cor - Static Radial Rating |
Reference speed |
Limiting speed |
---|---|---|---|---|---|---|---|
3312A-2Z | 60 mm | 130 mm | 54 mm | 127 N | 95 N | 5000 rpm | – rpm |
3213A-2Z | 65 mm | 120 mm | 38.1 mm | 80.6 N | 73.5 N | 4800 rpm | 3600 rpm |
3313A-2Z | 65 mm | 140 mm | 58.7 mm | 146 N | 110 N | 4500 rpm | – rpm |
3214A-2Z | 70 mm | 125 mm | 39.7 mm | 88.4 N | 80 N | 4500 rpm | – rpm |
3314A-2Z | 70 mm | 150 mm | 63.5 mm | 163 N | 125 N | 4300 rpm | – rpm |
3215A-2Z | 75 mm | 130 mm | 41.3 mm | 95.6 N | 88 N | 4500 rpm | – rpm |
3315A-2Z | 75 mm | 160 mm | 68.3 mm | 176 N | 140 N | 4000 rpm | – rpm |
FL30TAC02AT85DBMPN7D | 30 mm | 62 mm | 10 mm | 33.2 N | 27.5 N | - | 2800 rpm |
If you have any questions, please contact us!
Contact us
QQ:179616749 Tel:+49 201 844 536464
Address: EMAIL:179616749@qq.com
Copyright © 2022 The QWE Company all rights reserved XML map